With the New Year ahead of us, it’s time to ensure our ride is ready for the road. A look at the basics can head off significant problems later.
Top safety checks to make for Motorcycle before riding
One of the first items to check is our oil and filter. Even though you may still need to get the mileage, having not ridden your bike for prolonged periods would still necessitate an oil change. This is because your oil will still break down over time, and condensation can also develop, causing acids in the oil.
Check your tires, make sure the pressure is correct, and there is no weather checking on the side walls. Also, check for tread depth and make sure you have a least 3/32 of tread left. If they still need to be changed.
Inspect your drive belt for cracks, tears, and punctures that could compromise power to your rear wheel, not to mention your safety while on the road.
How are those brake pads front and rear? We sometimes forget about them until it’s too late, and we need them.
Lighting is crucial; do you have a turn signal not working? Is your brake light operating, or is a bulb burnt out or a bad brake light switch? Having all your lights working correctly is essential for you and the other drivers on the road who sometimes claim to have the “I didn’t see you syndrome.”
So, in conclusion, the moral of this story is to make sure you and your bike are ready for the riding season. Daylight will be extended, temperatures will be warming up, and your friends will be with you.
Keep the rubber side down and a smile on your face!
Here are some of the top FAQs for preparing your bike
What should you do before you start your Motorcycle?
Before you start your Motorcycle, it is essential to ensure that all the necessary components are in place. This includes verifying the engine’s compression and checking for leaks. Additionally, provide all your lights and turn signals are working correctly. Finally, double-check that your brakes are properly adjusted and in good condition. By taking these simple steps before starting up your bike, you can avoid any surprises down the road!
What should beginner motorcycle riders know?
Motorcycling can be an enjoyable and rewarding experience, but it does require some basic knowledge. Therefore, when you first start, it is essential to know the basic safety rules of the road. These include learning to ride correctly in a traffic situation and brake safely. Also, stay aware of your surroundings and avoid riding in unsafe or dangerous areas.
Be sure to wear proper clothing that will protect you from wind chill temperatures and weather conditions on your route. Emergency supplies like flares and first-aid kits should also be handy if something goes wrong on your ride. And finally, never drink alcohol while Motorcycle riding – this is Dangerous!
How do you prepare a motorcycle for a long ride?
When preparing your Motorcycle for a long ride, it is essential to ensure that it is well-oiled and in good condition. First, clean the bike thoroughly using a degreaser and water. Next, oil all moving parts with high-quality motor oil. Next, ensure all brackets are tight, and the hinges are aligned correctly. Next, tires are inflated to the correct pressure level (usually 29 psi), brakes are correctly adjusted according to the motorcycle owner’s manual guidelines, and the battery is connected and charged appropriately per manufacturers’ recommendations. Finally, check all instruments and lights while riding to avoid any unexpected problems during the journey ahead!